Description: SPDH Hotline Error RAP 362-783-00 SPDH side 1 hotline error. 366-783-00 SPDH side 2 hotline error.
Remedy: Switch off, then switch on the machine, GP 14. The fault persists. Y↓N→Perform SCP 5 Final Actions. Reload the software, GP 4. The fault persists. Y↓N→Perform SCP 5 Final Actions. Go to Flag 1. Disconnect, then check the harness and connectors, P/J460 on the SPDH PWB and P/J417 on the Scanner PWB. The harness and connectors are good. Y↓N→Repair the harness and connectors. Install new components as necessary: • SPDH PWB, PL 5.10 Item 5. • Scanner PWB, PL 60.20 Item 6. Re-install the harness. Check the operation of the machine. The fault persists. Y↓N→Perform SCP 5 Final Actions. Go to Flag 2. Disconnect, then check the SBC PWB/scanner PWB comms/power harness and connectors, P/J410 on the Scanner PWB and P/J860 on the SBC PWB. The harness and connectors are good. Y↓N→Repair the harness and connectors. If necessary, install a new scanner PWB, PL 60.20 Item 6. If the fault persists, perform the 303D SBC PWB Diagnostics RAP. Re-install the harness. Check the operation of the machine. The fault persists. Y↓N→Perform SCP 5 Final Actions. Check document size sensor 1 and document size sensor 2. Refer to the 305A Document Size Sensors Failure RAP. The fault persists. Y↓N→Perform SCP 5 Final Actions. Check the appropriate sensor: • For 362-783-00 faults, check the reg sensor. Perform the 305-340-00, 305-341-00 SPDH Reg Sensor Failure RAP. • For 366-783-00 faults, check the side 2 reg sensor. Perform the 305-342-00, 305-343-00 SPDH Side 2 Reg Sensor Failure RAP. The fault persists. Y↓N→Perform SCP 5 Final Actions. Perform the 303D SBC PWB Diagnostics RAP.