Remedy: Switch off, then switch on the machine, GP 14. The fault persists. Y↓N→Perform SCP 5 Final Actions. Reload the software, GP 4. The fault persists. Y↓N→Perform SCP 5 Final Actions. Go to Flag 1. Disconnect, then check the SBC PWB/scanner PWB comms/power harness and connectors, P/J410 on the Scanner PWB and P/J860 on the SBC PWB. The harness and connectors are good. Y↓N→Repair the harness and connectors. If necessary, install a new scanner PWB, PL 60.20 Item 6. If the fault persists, perform the 303D SBC PWB Diagnostics RAP. Re-install the harness. Check the operation of the machine. The fault persists. Y↓N→Perform SCP 5 Final Actions. Check document size sensor 1 and document size sensor 2. Refer to the 362A Side 1 Scanning Document Size RAP. The fault is fixed. Y↓N→Check the carriage home sensor. Refer to the 362A Scan Carriage Position RAP. The fault is fixed. Y↓N→Install a new scanner PWB, PL 60.20 Item 6. If the fault persists, perform the 303D SBC PWB Diagnostics RAP. Perform SCP 5 Final Actions. Perform SCP 5 Final Actions.