Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 374B — Xerox WorkCentre 5945

Code: 374B

Description: Tray 4 Out of Paper RAP Use this RAP when an incorrect tray 4 out of paper message is displayed.
Remedy: Refer to. Enter dC330 code 074-320, tray 4 empty sensor, Q74-320. Use a piece of paper to actuate Q74-320. The display changes. Y↓N→Go to Flag 1. Check Q74-320. Refer to: • GP 11 How to Check a Sensor. • GP 30 Tray 4 Control PWB Test Points. • P/J157, Tray 4 control PWB. • P/J775, IOT PWB. • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Tray 4 empty sensor, PL 80.33 Item 6. • Tray 4 Control PWB, PL 70.21 Item 2. Remove the tray 4 front cover, Tray 4 Removal. Close tray 4. The feed roll assembly drops when tray 4 is closed. Y↓N→Remove the tray 4 paper feed assembly. Ensure the lever is undamaged and operates correctly. If necessary, install a new tray 4 paper feed assembly, PL 80.33 Item 1. The fault may be intermittent. Check the wiring and connectors between the HCF control PWB and the sensor. If the fault persists, perform OF7 IOT PWB Diagnostics RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5945

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie