Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 381-193-00 — Xerox WorkCentre 5945

Code: 381-193-00

Description: Lead Edge Late to Registration Sensor from Tray 4 RAP 381-193-00 The lead edge of the paper was late to the registration sensor when feeding from tray 4.
Remedy: NOTE: The front door and left door must be closed, or their respective interlock switches must be cheated when checking +24V components. Enter dC330 code 082-150, registration sensor, Q82-150. Open the left door. Actuate Q82-150. The display changes. Y↓N→Go to Flag 1. Check Q82-150. Refer to: • GP 11 How to check a Sensor. • P/J763, IOT PWB. • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new registration sensor, PL 80.17 Item 7. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Enter dC330 code 081-001, tray 1 TAR sensor, Q81-001. Manually actuate Q81-001. The display changes. Y↓N→Go to Flag 2. Check Q81-001. Refer to: • GP 11 How to Check a Sensor. • P/J750, IOT PWB. • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new Tray 1 TAR sensor, PL 80.10 Item 5. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Enter dC330 code 082-001, tray 2 TAR sensor, Q82-001. Manually actuate Q82-001. The display changes. Y↓N→Go to Flag 3. Check Q82-001. Refer to: • GP 11 How to Check a Sensor. • P/J750, IOT PWB. • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new Tray 2 TAR sensor, PL 80.10 Item 5. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Enter dC330 code 080-006 TAR/Bypass tray motor MOT80-006. The motor runs. Y↓N→Go to Flag 4. Check MOT80-006. Refer to: • GP 10 How to Check a Motor. • P/J754, IOT PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new TAR/bypass tray motor, PL 80.25 Item 5. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Observe the transport rolls, PL 80.25 Item 7. The transport rolls rotate. Y↓N→Check the transport roll drive belt, drive pulley and pulley, PL 80.25. Install new components as necessary: • Transport roll drive belt, PL 80.25 Item 2. • Pulley, PL 80.25 Item 4. • Transport roll bearing, PL 80.25 Item 6. • Transport roll, PL 80.25 Item 7. • Transport gear pulley, PL 80.36 Item 12. If the fault persists, perform the 381-199-00 Late to HCF Exit Sensor from Tray 4 RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5945

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie