Description: SPDH Communications Error RAP 305-253-00 The scanner PWB to SPDH PWB communications failed.
Remedy: Flag 1. Disconnect, then check the ribbon cable between P/J460 on the SPDH PWB and P/J417 on the Scanner PWB. The ribbon cable and connectors are undamaged. Y↓N→Clean or repair the ribbon cable or connectors. If necessary, install new components: • Side 2 scan assembly data ribbon cable, PL 5.10 Item 16. • Scanner PWB, PL 60.20 Item 4. • SPDH PWB, PL 5.10 Item 5. Reconnect the P/J460 to P/J417 ribbon cable. Go to Flag 2. Disconnect, then check the data cable and connectors, P/J411 on the Scanner PWB and P/J854 on the SBC PWB. The data cable and connectors are undamaged. Y↓N→Clean or repair the data cable connectors. If necessary, install new components: • SBC PWB/scanner PWB data cable, PL 60.20 Item 22. • Scanner PWB, PL 60.20 Item 4. Perform an AltBoot, GP 4. If the fault persists, install new components as necessary: • Scanner PWB, PL 60.20 Item 4. • SPDH PWB, PL 5.10 Item 5. Perform SCP 5 Final Actions.