Description: SPDH Side 2 Reg Sensor Failure RAP 305-342-00 The SPDH side 2 reg sensor failed to detect the lead edge of the document within the correct time. 305-343-00 The SPDH side 2 reg sensor detected a paper jam.
Remedy: Enter dC330, code 005-343, side 2 reg sensor, Q05-343. Open the SPDH. Open and close the jam clearance baffle to actuate Q05-343. The display changes. Y↓N→Go to Flag 1. Check Q05-343. Refer to: • GP 38 How to Check an Adaptive Sensor. • P/J466, SPDH PWB. • 301D +3.3V Distribution RAP. Install new components as necessary: • Side 2 reg sensor, PL 60.30 Item 8. • SPDH PWB, PL 5.10 Item 5. Remove the SPDH rear cover, PL 5.10 Item 1. Hold the top cover interlock switch closed. Enter dC330, code 005-030 to run the read motor, MOT05-030. The motor runs. Y↓N→Go to Flag 2. Check MOT05-030. Refer to: • GP 10 How to Check a Motor. • P/J468, SPDH PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Read motor, PL 5.18 Item 1. • SPDH PWB, PL 5.10 Item 5. Perform the steps that follow: • Check the items that follow. Refer to GP 7 Miscellaneous Checks: – Read motor belt, PL 5.19 Item 18. Perform ADJ 5.1. SPDH Drive Belts if necessary. – Mid scan drive belt, PL 5.19 Item 21. Perform ADJ 5.1. SPDH Drive Belts if necessary. – Mid scan roll assembly, PL 5.17 Item 4. – Mid scan roll drive pulley, PL 5.19 Item 13. • Ensure that the SPDH is connected to ground correctly. Refer to the 301A Ground Distribution RAP.