Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 310-154-00, 310-164-00 — Xerox WorkCentre 5955

Code: 310-154-00, 310-164-00

Description: Trail Edge Late from Post Fuser Sensor RAP 310-154-00 The trail edge of the paper failed to de-actuate the post fuser sensor within the correct time for a simplex sheet. 310-164-00 The trail edge of the paper failed to de-actuate the post fuser sensor within the correct time for a duplex sheet.
Remedy: NOTE: Ensure that the door interlock switches are cheated when checking +24V components. Open the left door. Enter dC330 code 010-120, post fuser sensor, Q10-120. Use a piece of paper to actuate Q10-120. The display changes. Y↓N→Go to Flag 1. Check Q10-120. Refer to: • GP 11, How to Check a Sensor. • P/J761, IOT PWB. • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new post fuser sensor, PL 10.11 Item 7. If the fault persists, perform OF7 IOT PWB Diagnostics RAP. Enter dC330 code 010-020, fuser drive motor, MOT10-020. Observe the fuser roll and the pressure roll through the top of the fuser. The fuser rolls turn. Y↓N→Go to Flag 2. Check MOT10-020. Refer to: • GP 10, How to Check a Motor. • P/J761, IOT PWB. • P/J656, LVPS. • 301E +5V and +5VSB Distribution RAP. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Main drive module, PL 40.15 Item 1. • Fuser module, PL 10.8 Item 1. If the fault persists, perform OF7 IOT PWB Diagnostics RAP and 301L LVPS RAP. Enter dC330 code 010-020, MOT10-020. Observe the exit roll and exit drive gears. The motor runs and drives the exit drive roll. Y↓N→Check the components that follow: • Exit drive assembly, PL 10.14 Item 1. • Exit drive belts, PL 10.14 Item 2 and PL 10.14 Item 3. • Inverter assembly, PL 10.10 Item 1. Enter dC330 code 010-045, inverter gate solenoid, SOL10-045. Observe the solenoid and inverter gate. The solenoid energizes and the inverter gate is pulled down. Y↓N→Go to Flag 3. Check SOL10-045. Refer to: • GP 12 How to Check a Solenoid or Clutch. • P/J762, IOT PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new inverter gate solenoid, PL 10.13 Item 8. If the fault persists, perform OF7 IOT PWB Diagnostics RAP. Remove the centre exit cover. Enter dC330 code 010-030, inverter motor forward, MOT10-030, PL 10.12 Item 8. The motor runs and turns the inverter drive roll. Y↓N→Go to Flag 4. Check MOT10-030. Refer to: • GP 10, How to Check a Motor. • P/J762, IOT PWB. Install new components as necessary: • Inverter motor, PL 10.11 Item 9 (centre output tray) or PL 10.12 Item 8 (horizontal transport). • Drive belt, PL 10.11 Item 4 (centre output tray) or PL 10.12 Item 4 (horizontal transport). If the fault persists, perform OF7 IOT PWB Diagnostics RAP. Refer to GP 7. Check the components that follow: • Post fuser roll, PL 80.22 Item 12. • Horizontal transport assembly, PL 10.15 Item 1. • Inverter assembly, PL 10.10 Item 1. If the fault persists, perform the 381A Paper Feed Retries RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5955

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie