Mã lỗi 310-320-00 — Xerox WorkCentre 5955
Code:
Tất cả lỗi (156)
301-300-00
301-305-00
305-253-00
305-300-00
305-305-00
305-335-00, 305-336-00
305-340-00, 305-341-00
305-342-00, 305-343-00
305-940-00, 305-966-00
305-941-00
305-958-00
305-959-00
305-960-00
305-961-00
305-962-00
305-963-00
305-964-00
305-965-00
305A
305B
305C
305D
310-153-00, 310-163-00
310-154-00, 310-164-00
310-170-00
310-171-00
310-172-00
310-201-00
310-320-00
310-330-00, 310-340-00
310-338-00
310-399-00
310-400-00
310-702-00
310A
312-024-00-110, 312-025-00-110
312-024-00-150, 312-025-00-150
312-043-00-110, 312-046-00-110
312-043-00-150, 312-046-00-150
312-061-00-150
312-062-00-150
312-063-00-150, 312-414-00-150, 312-488-00-150, 312-490-00-150
312-065-00-150, 312-383-00-150, 312-484-00-150, 312-486-00-150
312-066-00-150, 312-384-00-150
312-125-00-110, 312-126-00-110, 312-199-00-110
312-125-00-150, 312-126-00-150, 312-199-00-150
312-127-00-110
312-127-00-150
312-151-00-110, 312-152-00-110
312-151-00-150, 312-152-00-150
312-160-00-150, 312-162-00-150
312-171-00-110, 312-172-00-110
312-171-00-150, 312-172-00-150
312-180-00-150, 312-182-00-150
312-184-00-150, 312-494-00-150, 312-496-00-150
312-198-00-110
312-198-00-150
312-310-00-110, 312-312-00-110, 312-313-00-110
312-310-00-150, 312-312-00-150, 312-313-00-150
312-340-00-110, 312-341-00-110, 312-342-00-110
312-340-00-150, 312-342-00-150
312-352-00-150, 312-353-00-150
312-371-00-110, 312-372-00-110, 312-378-00-110
312-371-00-150, 312-372-00-150, 312-378-00-150
312-377-00-150
312-392-00-110, 312-393-00-110, 312-394-00-110
312-392-00-150, 312-393-00-150, 312-394-00-150
312-396-00-110, 312-397-00-110, 312-398-00-110
312-396-00-150, 312-397-00-150, 312-398-00-150
312-418-00-150
312-462-00-110
312-462-00-150
312A-110
312A-150
312B-110
312B-150
312C-110
312C-150
312D-110
312D-150
312E-110
312E-150
312F-150
312G-150
312H-150
312J-150
361-100-00
362-310-00
362-357-00, 362-960-00
362-399-00
362-450-00 ... 362-472-00
362-473-00
362-474-00, 362-475-00
362-476-00
362-477-00 ... 362-481-00, 362-782-00
362-490-00, 362-491, 366-490-00, 366-491
362-777-00, 362-778-00
362-783-00, 366-783-00
362-784-00
362A
362B
366-450-00 ... 366-463-00, 366-466-00 ... 366-468-00
366A
370A
371-100-00, 371-217-00
371-500-00
371A
372-100-00, 372-217-00
372-500-00
373-100-00, 373-217-00
373-500-00
373A
373B
374-100-00, 374-217-00
374-500-00
374A
374B
375-100-00
375A
381-106-00
381-126-00
381-136-00
381-146-00
381-151-00
381-152-00
381-155-00
381-159-00
381-161-00
381-162-00
381-167-00
381-190-00
381-191-00
381-192-00
381-193-00
381-194-00
381-195-00
381-196-00
381-197-00
381-198-00
381-199-00
381-200-00
381A
383-155-00, 383-156-00
383-157-00
391-365-00
391-375-00
391-377-00
391A
392-399-00
392-400-00
392A
393-360-00 ... 393-364-00
393-365-00
393-390-00
393-399-00
393-401-00
Code:
310-320-00
Description: Fuser Control Failure RAP 310-320-00 One or more fuser lamps is above the maximum temperature, or the temperature difference between any of the lamps is greater than 25 degrees C.
Remedy: Switch off, then switch on the machine, GP 14. The display shows ‘Ready to Copy’. Y↓N→Go to Flag 1. The voltage at the front and mid fuser temperature sensors should be 3.2 volts when the sensors are cold. In standby mode the voltage should be 0.72 to 0.96 volts. Refer to: • P/J764, IOT PWB. • PJ100. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Before new components are installed, restore the NVM values to default. As necessary, perform the actions that follow: • Repair the harness between P/J764 and PJ100. • Install a new fuser connector, PL 10.8 Item 3. • Perform the OF7 IOT PWB Diagnostics RAP. If the fault persists, install a new fuser module, PL 10.8 Item 1. Perform SCP 5 Final Actions.
← Xem tất cả mã lỗi Xerox WorkCentre 5955