Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 310-400-00 — Xerox WorkCentre 5955

Code: 310-400-00

Description: Fuser CRUM Communication Fault RAP 310-400-00 The fuser CRUM communications have failed.
Remedy: Remove the fuser module and print cartridge to prevent damage to the CRUMs when checking for continuity. 1. Ensure that P/J766 on the IOT PWB is correctly and securely connected. 2. Go to Flag 1. Check the harness, GP 7, and measure the voltages. Refer to: • 301B 0V Distribution RAP. • 301E +5V and +5VSB Distribution RAP. 3. Go to Flag 2. Check the items that follow: • The harness, GP 7. Repair as necessary. • The fuser CRUM connector, for damage or contamination. 4. Go to Flag 3. Check the items that follow: • The harness, GP 7. Repair as necessary. • The print cartridge CRUM connector, for damage or contamination. 5. Perform the OF7 IOT PWB Diagnostics RAP. 6. If the fault is intermittent, the cause may be due to electrical noise. Go to OF10 Intermittent Failure RAP. 7. Install new components as necessary: • Fuser module, PL 10.8 Item 1. • Print cartridge, PL 90.17 Item 9.

← Xem tất cả mã lỗi Xerox WorkCentre 5955

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie