Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312-151-00-110, 312-152-00-110 — Xerox WorkCentre 5955

Code: 312-151-00-110, 312-152-00-110

Description: Sheet Late to Bin 1 RAP 312-151-00-110 The compile exit sensor was not deactuated within a specified time. 312-152-00-110 The compile exit sensor was not actuated within a specified time
Remedy: NOTE: All 2K LCSS interlocks must be made to supply +24V to the motors. Enter dC330 code 012-224 to run the transport motor 2, MOT12-224. The motor runs. Y↓N→Go to Flag 3. Check MOT12-224. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 10, How to check a motor. • P/J309, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Transport motor 2, PL 12.60 Item 5. • 2K LCSS PWB, PL 12.75 Item 1. Enter dC330 code 012-225 to energize the exit diverter solenoid, SOL12-225. The solenoid energizes. Y↓N→Go to Flag 4. Check SOL12-225. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 12, How to Check a Solenoid or Clutch. • P/J306, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Exit diverter solenoid, PL 12.60 Item 12. • 2K LCSS PWB, PL 12.75 Item 1. Enter dC330 code 012-106, compiler exit sensor, Q12-106. Actuate Q12-106. The display changes. Y↓N→Go to Flag 1. Check Q12-106. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 11, How to Check a sensor. • P/J313, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Compiler exit sensor, PL 12.65 Item 4. • 2K LCSS PWB, PL 12.75 Item 1. Enter dC330, code 012-223 to run the transport motor 1, MOT12-223. The motor runs. Y↓N→Go to Flag 2. Check MOT12-223. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J305, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Transport motor 1, PL 12.40 Item 2. • 2K LCSS PWB, PL 12.75 Item 1. If the fault persists, perform the procedures that follow: • 312-396-00-110, 312-397-00-110, 312-398-00-110 Rear Tamper Move Failure RAP • 312H-110 Copy Damage in the 2K LCSS RAP • 312J-110 Mis-Registration in Stapled Sets and Non-Stapled Sets RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5955

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie