Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312-340-00-110, 312-341-00-110, 312-342-00-110 — Xerox WorkCentre 5955

Code: 312-340-00-110, 312-341-00-110, 312-342-00-110

Description: Ejector Movement Failure RAP 312-340-00-110 The ejector failed to return to the home position in the required time. 312-341-00-110 The ejector failed to move away from the home position in the required time. 312-342-00-110 The ejector failed to attain the compile/eject position in the required time. NOTE: A cycle of operation for the ejector is to cycle from the home position to the out position and back to the home position.
Remedy: NOTE: All 2K LCSS interlocks must be made to supply +24V to the motors. Enter dC330 code 012-185, ejector out sensor Q12-185. Actuate Q12-185. The display changes. Y↓N→Go to Flag 2. Check Q12-185. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. • P/J304, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Ejector out sensor, PL 12.50 Item 3. • 2K LCSS PWB, PL 12.75 Item 1. Enter dC330 code 012-184, ejector home sensor Q12-184. Actuate Q12-184. The display changes. Y↓N→Go to Flag 1. Check Q12-184. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. • P/J304, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Ejector home sensor, PL 12.50 Item 3. • 2K LCSS PWB, PL 12.75 Item 1. Enter dC330 code 012-236, ejector motor cycle to cycle the ejector motor, MOT12-234. The ejector cycles between the out position and the home position. Y↓N→Check that the large tie-wrap around the motor of the ejector assembly has not cut through the motor wires and caused a short circuit to the case of the motor. The wiring is good. Y↓N→Cut the tie-wrap, then insulate the wires. Go to Flag 3. Check MOT12-234. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J303, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Ejector assembly, PL 12.50 Item 1. • 2K LCSS PWB, PL 12.75 Item 1. The ejector cycles noisily, colliding with the end stops. Y↓N→Check the stapler to ensure the staples are correctly formed. Mis-formed staples can cause the set to hang in the stapler causing ejector movement failures. The staples are correctly formed. Y↓N→Clear the staple head of any mis-formed staples, then check the operation of the stapler. If necessary, install a new staple head unit, PL 12.55 Item 5. If the ejector is still not moving, install a new ejector assembly, PL 12.50 Item 1. Enter dC330 code 012-096, ejector motor encoder sensor Q12-096. Slowly rotate the ejector motor encoder wheel. The display changes. Y↓N→Go to Flag 4. Check Q12-096. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. • P/J304, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Ejector motor encoder sensor, PL 12.50 Item 3. • 2K LCSS PWB, PL 12.75 Item 1. Perform the 312G-110 2K LCSS PWB Damage RAP. If necessary install a new 2K LCSS PWB, PL 12.75 Item 1.

← Xem tất cả mã lỗi Xerox WorkCentre 5955

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie