Description: Booklet Stapler Assembly Failure RAP 312-352-00-150 The rear booklet staple cartridge assembly was not correctly primed within the required time. 312-353-00-150 The front booklet staple cartridge assembly was not correctly primed within the required time.
Remedy: Enter dC330, code 012-442, actuate the front staple cartridge primed sensor, Q12-442 by inserting a staple cartridge that has correctly primed staples. Then remove that cartridge and insert a cartridge that does not have primed staples. The display changes. Y↓N→Go to Flag 1. Check Q12-442. Refer to: • GP 11, How to Check a Sensor. • P/J111, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. • Wiring Harness. Repair or install new components as necessary: • LVF PWB, PL 12.425 Item 8. • BM staple cartridge assembly, PL 12.395 Item 8. Enter dC330, code 012-443, actuate the rear staple cartridge primed sensor, Q12-443 by inserting a staple cartridge that has correctly primed staples. Then remove that cartridge and insert a cartridge that does not have primed staples. The display changes. Y↓N→Go to Flag 2. Check Q12-443. Refer to: • GP 11, How to Check a Sensor. • P/J111, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. • Wiring Harness. Repair or install new components as necessary: • LVF PWB, PL 12.425 Item 8. • BM staple cartridge assembly, PL 12.395 Item 8. The fault may be intermittent. Check for damaged wiring or connectors. If necessary repair the wiring, or install new components.