Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312-371-00-110, 312-372-00-110, 312-378-00-110 — Xerox WorkCentre 5955

Code: 312-371-00-110, 312-372-00-110, 312-378-00-110

Description: Staple Head Unit Movement Failure RAP 312-371-00-110 The staple head failed to leave home in the required time. 312-372-00-110 The staple head failed to return to home in the required time. 312-378-00-110 The staple head unit failed to index to the correct location within the required time. NOTE: The home position is when the staple head unit is at the corner stapling position (fully to the front of the 2K LCSS and rotated through 45 degrees).
Remedy: NOTE: All 2K LCSS interlocks must be made to supply +24V to the motors. Enter dC330 code 012-235 to move the ejector assembly to the out position. Enter code 012- 250, SU1 motor cycle to run the SU1 motor, MOT12-249. The stapling unit cycles back and forth along the track. Y↓N→Go to Flag 3. Check MOT12-249. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 10, How to Check a Motor. • P/J308, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Stapler traverse assembly, PL 12.55 Item 1. • 2K LCSS PWB, PL 12.75 Item 1. Enter dC330 code 012-135, staple home sensor Q12-135. Actuate Q12-135 by rotating the green thumbwheel to move the stapler unit to and from the home position. The display changes. Y↓N→Go to Flag 1. Check Q12-135. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 11. How to check a sensor. • P/J308, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Staple home sensor, PL 12.55 Item 3. • 2K LCSS PWB, PL 12.75 Item 1. Enter dC330 code 012-168, stapler index sensor, Q12-168. Actuate Q12-168 by rotating the green thumbwheel to move the stapler unit to and from the flag position (approximately 115mm (4.5 inches) from the front of the track). The display changes. Y↓N→Go to Flag 2. Check Q12-168. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 11 How to Check a Sensor. • P/J308, 2K LCSS PWB. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Stapler index sensor, PL 12.55 Item 3. • 2K LCSS PWB, PL 12.75 Item 1. Perform SCP 5 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5955

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie