Description: Staple Head Unit Movement Failure RAP 312-371-00-150 The staple head unit fails to move. 312-372-00-150 The staple head unit was not at the home position. 312-378-00 The staple head unit was not indexed correctly. NOTE: The home position is when the staple head unit is at the corner stapling position (fully to the front of the LVF BM and rotated through 45 degrees).
Remedy: NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Enter dC330, code 012-234, ejector motor home, MOT12-234, to move the ejector assembly fully to the right. Enter code 012-250, SU1 motor cycle. The stapling unit cycles back and forth along the track. Y↓N→Go to Flag 3. Check SU1 motor, MOT12-249. Refer to: • GP 10, How to Check a Motor. •. • P/J308, LVF PWB. • 312D-150. LVF BM Power Distribution RAP. Repair or install new components as necessary: • Stapler traverse assembly, PL 12.365 Item 1. • LVF PWB, PL 12.425 Item 8. Enter dC330, code 012-135, staple home sensor, Q12-135. Actuate Q12-135, by moving the stapler unit to and from the home position using the green thumb-wheel. The display changes. Y↓N→Go to Flag 1. Check Q12-135. Refer to: • GP 11. How to check a sensor. •. • P/J308, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Staple home sensor, PL 12.365 Item 3. • LVF PWB, PL 12.425 Item 8. Enter dC330, code 012-234, ejector motor, MOT12-234, to move the ejector assembly fully to the right. Enter code 012-168, stapler index sensor, Q12-168. Actuate Q12-168, by moving the stapler unit to and from the flag position (approximately 115mm (4.5 inches) from the front of the track) using the green thumb-wheel. The display changes. Y↓N→Go to Flag 2. Check Q12-168. Refer to: • GP 11 How to Check a Sensor. • P/J308, LVF PWB. • 312D-150 LVF BM Power Distribution RAP. Repair or install new components as necessary: • Stapler index sensor, PL 12.365 Item 3. • LVF PWB, PL 12.425 Item 8. Perform SCP 5 Final Actions.