Code: 312C-150
Description: LVF BM Initialization Failure RAP When an initialization command is received from the machine, the units are initialized in 2 stages: • The units that follow are initialized sequentially: 1. If the staple head is not at the home position, it is driven to the home position. 2. If the staple head unit is not at the home position, it is driven to the home position. 3. If the ejector is not at the home position, it is driven to the home position. • The units that follow are then initialized simultaneously: – If the front tamper is not at the home position, it is driven to the home position. – If the rear tamper is not at the home position, it is driven to the home position. – If the hole punch is not at the home position, it is driven to the home position. – If the paddle wheel is not at the home position, it is driven to the home position. – If the stacker is not at the home position, it is driven to the home position. NOTE: The staple cartridge must be fully pushed home. • The booklet maker units that follow are then initialized sequentially: 1. If the BM back stop is not at the home position, it is driven to the home position. 2. If the BM tampers are not in the home position, they are driven to the home position. 3. If the BM stapler is not at the home position, it is driven to the home position. 4. If the BM crease blade is not at the home position, it is driven to the home position. 5. If the BM paddles are not in the home position, they are driven to the home position. 6. The BM staplers are cycled to ensure the staples are primed.
Remedy: Check the fuse on the LVF PWB. If the fuse is good, continue at the procedure. If the fuse not good, install a new LVF PWB, PL 12.425 Item 8. Check the LVF PWB DIP switch settings. Refer to 312F-150 LVF PWB and LVF BM PWB DIP Switch Settings RAP. Remove the LVF BM covers-150, so that the units can be viewed. Cheat the front door interlock switch and the top cover interlock switch. Check that LED 2 is illuminated. This shows that all interlocks are made. If the LED fails to illuminate, go to 312-310-00-150, 312- 312-00-150, 312-313-00-150 Interlocks RAP.
Refer to. Check that the software heartbeat is present on LED 1. The LED should flash twice per second if the LVF software is running. If necessary, reload the LVF software, refer to GP 4 Machine Software If the initialization sequence fails to place any unit at the home position, refer to the appropriate RAPs: • Front tamper not at home. Refer to 312-392-00-150, 312-393-00-150, 312-394-00-150 LVF BM Front Tamper Move Failure RAP. • Rear tamper not at home. Refer to 312-396-00-150, 312-397-00-150, 312-398-00-150 LVF BM Rear Tamper Move Failure RAP. • Paddle not at home. Refer to 312-024-00-150, 312-025-00-150 LVF BM Paddle Roll Failure RAP. • Bin 1 not at home. Refer to 312-462-00-150 LVF BM Bin 1 Movement Failure RAP. • Punch not at home. Refer to 312-043-00-150, 312-046-00-150 LVF BM Hole Punch Operation Failure RAP. • Staple head not at home. Refer to 312E-150 LVF BM Staple Head Operation Failure RAP. • Stapling unit not at home. Refer to 312-371-00-150, 312-372-00-150, 312-378-00-150 LVF BM Staple Head Unit Movement Failure RAP. • Ejector not at home. Refer to 312-340-00-150, 312-342-00-150 LVF BM Ejector Movement Failure RAP.
Refer to. Check that the software heartbeat is present on LED 1. The LED should flash twice per second if the LVF software is running. If necessary, reload the LVF software, refer to GP 4 Machine Software If the initialization sequence fails to place any unit at the home position, refer to the appropriate RAPs: • Front tamper not at home. Refer to 312-392-00-150, 312-393-00-150, 312-394-00-150 LVF BM Front Tamper Move Failure RAP. • Rear tamper not at home. Refer to 312-396-00-150, 312-397-00-150, 312-398-00-150 LVF BM Rear Tamper Move Failure RAP. • Paddle not at home. Refer to 312-024-00-150, 312-025-00-150 LVF BM Paddle Roll Failure RAP. • Bin 1 not at home. Refer to 312-462-00-150 LVF BM Bin 1 Movement Failure RAP. • Punch not at home. Refer to 312-043-00-150, 312-046-00-150 LVF BM Hole Punch Operation Failure RAP. • Staple head not at home. Refer to 312E-150 LVF BM Staple Head Operation Failure RAP. • Stapling unit not at home. Refer to 312-371-00-150, 312-372-00-150, 312-378-00-150 LVF BM Staple Head Unit Movement Failure RAP. • Ejector not at home. Refer to 312-340-00-150, 312-342-00-150 LVF BM Ejector Movement Failure RAP.