Description: Staple Head Operation Failure RAP Use this RAP when the staple head fails to cycle or the stapler jaw is not at the home position. NOTE: The home position is with the jaws of the staple head fully open.
Remedy: NOTE: All 2K LCSS interlocks must be made to supply +24V to the motors. Place 2 sheets of paper in the stapler jaws. Enter dC330 code 012-247 to cycle the staple head once. Enter code 012-248 to reverse the staple head to the home position. The staple head operates as expected. Y↓N→Go to Flag 1 and Flag 2. Check the wiring and connectors between the 2K LCSS PWB and the staple head. The wiring is good. Y↓N→Repair the wiring Wiring Harness Repairs. Refer to: • 312G-110 2K LCSS PWB Damage RAP. • GP 13, How to Check a Switch. • P/J308, 2K LCSS PWB. •, Component location. • 312D-110 2K LCSS Power Distribution RAP. Install new components as necessary: • Staple head unit, PL 12.55 Item 5. • 2K LCSS PWB, PL 12.75 Item 1. NOTE: Switch off, then switch on the machine, GP 14, to enable operation of the staple head. Perform SCP 5 Final Actions.