Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 312E-150 — Xerox WorkCentre 5955

Code: 312E-150

Description: Staple Head Operation Failure RAP Use this RAP when the staple head failed to cycle, or the staple head was not at the home position. NOTE: The home position is with the jaws of the staple head fully open.
Remedy: NOTE: After repairing the fault using this RAP, switch off, then switch on the machine, GP 14, to enable operation of the staple head. NOTE: All LVF BM interlocks must be made to supply +24V to the motors. Place 2 sheets of paper in the stapler jaws. Enter dC330, code 012-247 to cycle the staple head once, and 12-248 to reverse the staple head to the home position. The staple head operates as expected. Y↓N→Go to Flag 1 and Flag 2. Check the wiring and connectors between the LVF PWB and the staple head. The wiring is good. Y↓N→Repair the wiring. Install new components as necessary: • Staple head unit, PL 12.365 Item 5. • LVF PWB, PL 12.425 Item 8. Perform SCP 5 Final Actions.

← Xem tất cả mã lỗi Xerox WorkCentre 5955

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie