Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 361-100-00 — Xerox WorkCentre 5955

Code: 361-100-00

Description: LED Print Head Data Integrity Failure RAP 361-100-00 Checksum read from LED print head did not match the checksum calculated on the SBC PWB.
Remedy: Perform dC304 LED Print head Validation. The LED print head validation test failed. Y↓N→Perform SCP 5 Final Actions. Switch off, then switch on the machine, GP 14. The fault persists. Y↓N→Perform SCP 5 Final Actions. Go to Flag 1. Disconnect, then check the ribbon cable and connectors, P/J511 on the LED print head module and P/J851 on the SBC PWB. The ribbon cable and connectors are clean and undamaged. Y↓N→Clean or repair the ribbon cable and connectors. Install new components as necessary: • LED print head to SBC PWB ribbon cable, PL 60.35 Item 17. • LED print head module, PL 60.35 Item 1. Re-install the ribbon cable. Perform dC304 LED Print Head Validation. The LED print head validation test failed. Y↓N→Perform SCP 5 Final Actions. Install a new LED print head module, PL 60.35 Item 1. Check the operation of the machine. The fault persists. Y↓N→Perform SCP 5 Final Actions. Reload the software, GP 4. If the fault persists, perform the 303D SBC PWB Diagnostics RAP.

← Xem tất cả mã lỗi Xerox WorkCentre 5955

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie