Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 362A — Xerox WorkCentre 5955

Code: 362A

Description: Side 1 Scanning Document Size RAP The side 1 scanner encountered a document that was larger than expected. The side 1 scanner encountered a document of unknown size. The side 1 document size sensors incorrectly determined the size of the document.
Remedy: Check that the input module angle sensor actuator is not damaged. If necessary install a new input module angle sensor actuator, PL 60.20 Item 12. Enter dC330 code 062-301, SPDH angle sensor Q62-301. Actuate Q62-301. The display changes. Y↓N→Go to Flag 1. Check Q62-301. Refer to: • GP 11, How to Check a Sensor. • P/J423, Scanner PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • SPDH angle sensor, PL 60.20 Item 7. • Scanner PWB, PL 60.20 Item 4. Enter dC330 code 062-019, SPDH platen down sensor, Q62-019. Actuate Q62-019. The display changes. Y↓N→Go to Flag 2. Check Q62-019. Refer to: • GP 11, How to Check a Sensor. • P/J423, Scanner PWB. • 301D +3.3V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • SPDH platen down sensor, PL 60.20 Item 7. • Scanner PWB, PL 60.20 Item 4. Raise the SPDH. Enter dC330 code 062-251, document size sensor 1, Q62-251. Actuate Q62- 251 by placing a piece of paper on the document glass above the sensor. The display changes. Y↓N→Go to Flag 3. Check Q62-251. Refer to: • GP 11, How to Check a Sensor. • PL 60.20 Item 4, Scanner PWB. • 301E +5V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Document size sensor 1, PL 60.20 Item 3. • Scanner PWB, PL 60.20 Item 4. Enter dC330 code 062-253 document size sensor 2, Q62-253. Actuate Q62-253 by placing a piece of paper on the document glass above the sensor. The display changes. Y↓N→Go to Flag 4. Check Q62-253. Refer to: • GP 11, How to Check a Sensor. • PL 60.20 Item 4, Scanner PWB. • 301E +5V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Document size sensor 2, PL 60.20 Item 3. • Scanner PWB, PL 60.20 Item 4. Go to Flag 5. Disconnect and check the SBC PWB to scanner PWB data cable, and the connectors P/J411 on the, Scanner PWB and P/J854 on the SBC PWB. The SBC PWB/Scanner PWB data cable and P/J connectors are clean and undamaged. Y↓N→Clean or repair the SBC PWB/scanner PWB data cable or connectors. Install new components as necessary: • SBC PWB/scanner PWB data cable, PL 60.20 Item 22. • Scanner PWB, PL 60.20 Item 4. If the fault persists, perform the 303D SBC PWB Diagnostics RAP. If the fault persists, perform an AltBoot, GP 4.

← Xem tất cả mã lỗi Xerox WorkCentre 5955

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie