Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 381-155-00 — Xerox WorkCentre 5955

Code: 381-155-00

Description: Lead Edge Late to Registration Sensor from the Bypass Tray RAP 381-155-00 The lead edge of the paper was late to the registration sensor when feeding from the bypass tray.
Remedy: NOTE: The front door and left door must be closed, or their respective interlock switches must be cheated when checking +24V components. Open the left door. Enter dC330 code 082-150, registration sensor, Q82-150. Actuate Q82-150. The display changes. Y↓N→Go to Flag 1. Check Q82-150. Refer to: • GP 11 How to Check a Sensor. • P/J763, IOT PWB. • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new registration sensor, PL 80.17 Item 7. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. With the left door closed, enter dC330 code 080-025, TAR/bypass tray motor, MOT80-006, in reverse. The motor runs in reverse. Y↓N→Go to Flag 2. Check MOT80-006. Refer to: • GP 10, How to Check a Motor. • P/J754, IOT PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new TAR/bypass tray motor, PL 80.25 Item 5. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Go to Flag 3. Check the bypass tray clutch, PL 70.35 Item 9. Refer to: • GP 12 How to Check a Solenoid or Clutch. • P/J757, IOT PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. The clutch is good. Y↓N→If necessary, install a new bypass tray clutch, PL 70.35 Item 9. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Check the condition and operation of the components that follow. Refer to GP 7 Miscellaneous Checks: • Bypass tray drive assembly. • Tension spring. • Bypass tray drive belt, PL 80.25 Item 10. • Drive pulley, PL 80.25 Item 3. Install new components as necessary: • Bypass tray assembly, PL 70.35 Item 1. • Bypass tray drive belt, PL 80.25 Item 10. • Drive pulley, PL 80.25 Item 3. Refer to GP 7 Miscellaneous Checks. Perform the steps that follow: • Check the bypass tray feed roll, PL 70.35 Item 14, retard roll, PL 70.35 Item 16 and retard pad, PL 70.35 Item 6. • If necessary clean the feed roll, retard roll and retard pad using a cloth dampened with water. • If necessary install new components, PL 70.35.

← Xem tất cả mã lỗi Xerox WorkCentre 5955

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie