Code: 381-161-00
Description: Lead Edge Late to Registration Sensor Duplex Mode RAP 381-161-00 The lead edge was late to the registration sensor in duplex mode.
Remedy: NOTE: The front door and left door must be closed, or their respective interlock switches must be cheated when checking +24V components. Open the left door. Enter dC330 code 083-160, duplex sensor, Q83-160. Open the inner duplex door. Manually actuate Q83-160. The display changes. Y↓N→Go to Flag 1. Check Q83-160. Refer to: • GP 11 How to Check a Sensor. • P/J759, IOT PWB. • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new duplex sensor, PL 80.10 Item 8. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Remove the duplex motor cover PL 80.22 Item 21. Locate the duplex motor, MOT83-060. Enter dC330 code 083-062, duplex motor fast speed. The motor runs. Y↓N→Go to Flag 2. Check MOT83-060. Refer to: • GP 10 How to Check a Motor. • P/J762, IOT PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new duplex motor assembly, PL 80.22 Item 8. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Enter dC330 code 083-060, duplex motor slow speed, MOT83-060. The motor runs. Y↓N→Go to Flag 2. Check MOT83-060. Refer to: • GP 10 How to Check a Motor. • P/J762, IOT PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new duplex motor assembly, PL 80.22 Item 8. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Observe the duplex rolls, PL 80.22. The upper, mid and lower duplex rolls rotate. Y↓N→Refer to GP 7. Check the components that follow: • Upper duplex roll, PL 80.22 Item 14. • Mid duplex rolls, PL 80.22 Item 15. • Lower duplex roll, PL 80.22 Item 13. • Drive belt (65T), PL 80.22 Item 2. • Drive belt (89T), PL 80.22 Item 3. • Drive belt (45T), PL 80.22 Item 4. Install new components as necessary. Check the duplex roll idlers, PL 80.10 Item 11, refer to GP 7. Manually rotate the idler rolls. The idler rolls rotate. Y↓N→Install new components as necessary: • Duplex roll idler, PL 80.10 Item 11. • Idler spring, PL 80.10 Item 12. The fault persists Y↓N→Perform SCP 5 Final Actions. Enter dC330 code 082-150, registration sensor, Q82-150. Manually actuate Q82-150 with a strip of paper. The display changes. Y↓N→Go to Flag 3. Check Q82-150. Refer to: • GP 11 How to Check a Sensor. • P/J763, IOT PWB. • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new registration sensor, PL 80.17 Item 7. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Refer to GP 7 and OF10 Intermittent Fault RAP. Check the components that follow: • Registration nip roll, PL 80.15 Item 4. • Registration roll, PL 80.17 Item 5. • Registration drive pulley, PL 80.17 Item 3. • Registration drive belt, PL 80.17 Item 4. Install new components as necessary.