Description: Paper Feed Retries RAP Use this RAP when the relevant fault code RAP failed to identify the cause of the jam, and the machine exhibits the symptoms that follow: • Intermittent paper jams at different points in the paper path from registration to IOT exit. • Paper jams at any point in the paper path from registration to IOT exit, but only from one specific paper tray.
Remedy: Enter dC131. Set the relevant NVM location to 0: • 500- 102 Tray1_2FeedRetries, for tray 1 and 2. • 500-146 HCFRetries, for tray 3 and 4. Make copies from the relevant paper tray. Check for misfeeds from the tray (381-106-00, 381- 126-00, 381-136-00, 381-146-00 fault codes). Misfeeds occur. Y↓N→Enter dC131. Reset the relevant NVM location to its default value. Make copies from the relevant paper tray. Paper jams occur. Y↓N→Perform SCP 5 Final Actions. Perform the appropriate RAP for the fault code displayed. Enter dC131. Reset the relevant NVM location to its default value. Perform the appropriate RAP dependent on the tray used: • 381-106-00 Lead Edge late to TAR 1 Sensor from Tray 1 RAP. • 381-126-00 Lead Edge Late to TAR 2 Sensor from Tray 2 RAP. • 381-136-00 Lead Edge Late to Tray 3 Feed Sensor RAP. • 381-146-00 Lead Edge Late to Tray 4 Feed Sensor RAP.