Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 383-155-00, 383-156-00 — Xerox WorkCentre 5955

Code: 383-155-00, 383-156-00

Description: Duplex Sensor RAP 383-155-00 The lead edge was late to the duplex sensor. 383-156-00 The trail edge was late to the duplex sensor.
Remedy: NOTE: The front door and left door must be closed, or their respective interlock switches must be cheated when checking +24V components. Open the left door. Enter dC330 code 083-160, duplex sensor, Q83-160. Open the inner duplex door. Manually actuate Q83-160. The display changes. Y↓N→Go to Flag 1. Check Q83-160. Refer to: • GP 11 How to Check a Sensor. • P/J759, IOT PWB. • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new duplex sensor, PL 80.10 Item 8. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Remove the centre exit cover. Locate the inverter motor MOT10-030, PL 10.11 Item 9. Enter dC330 code 010-036 inverter motor high speed in reverse. The motor runs and turns the inverter drive roll in reverse. Y↓N→Go to Flag 3. Check MOT10-030. Refer to: • GP 10 How to Check a Motor. • P/J762, IOT PWB. Install new components as necessary: • Inverter motor, PL 10.11 Item 9. • Drive belt, PL 10.11 Item 4. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Remove the duplex motor cover, PL 80.22 Item 21. Locate the duplex motor, MOT83-060. Enter dC330 code 083-062, duplex motor fast speed. The motor runs. Y↓N→Go to Flag 2. Check MOT83-060. Refer to: • GP 10 How to Check a Motor. • P/J762, IOT PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new duplex motor assembly, PL 80.22 Item 8. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Enter dC330 code 083-060, duplex motor slow speed, MOT83-060. The motor runs. Y↓N→Go to Flag 2. Check MOT83-060. Refer to: • GP 10 How to Check a Motor. • P/J762, IOT PWB. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new duplex motor assembly, PL 80.22 Item 8. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Observe the duplex rolls, PL 80.22. The upper, mid and lower duplex rolls rotate. Y↓N→Refer to GP 7. Check the components that follow: • Upper duplex roll, PL 80.22 Item 14. • Mid duplex rolls, PL 80.22 Item 15. • Lower duplex roll, PL 80.22 Item 13. • Drive belt (65T), PL 80.22 Item 2. • Drive belt (89T), PL 80.22 Item 3. • Drive belt (45T), PL 80.22 Item 4. Install new components as necessary. Check the duplex roll idlers, PL 80.10 Item 11, refer to GP 7. Manually rotate the idler rolls. The idler rolls rotate. Y↓N→Install new components as necessary: • Duplex roll idler, PL 80.10 Item 11. • Idler spring, PL 80.10 Item 12. Enter dC330 code 093-045, print cartridge motor, MOT93-045. Observe the photoreceptor. The photoreceptor turns. Y↓N→Go to Flag 6. Check MOT93-045. Refer to: • GP 10, How to check a Motor. • P/J761, IOT PWB. • P/J656,LVPS. • 301E +5V and +5VSB Distribution RAP. • 301G +24V Distribution RAP. • 301B 0V Distribution RAP. Install new components as necessary: • Main drive module, PL 40.15 Item 1. • Print cartridge, PL 90.17 Item 9. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP and 301L LVPS RAP. Enter dC330 code 082-150, registration sensor, Q82-150. Manually actuate Q82-150 with a strip of paper. The display changes. Y↓N→Go to Flag 4. Check Q82-150. Refer to: • GP 11 How to Check a Sensor. • P/J763, IOT PWB. • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new registration sensor, PL 80.17 Item 7. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Enter dC330 code 080-040, registration motor, MOT80-040. Observe the registration roll, PL 80.17 Item 5. The registration roll turns. Y↓N→Go to Flag 5. Check MOT80-040. Refer to: • GP 10, How to Check a Motor. • P/J762, IOT PWB. If necessary, install a new registration motor, PL 40.15 Item 6. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Refer to GP 7 and OF10 Intermittent Fault RAP. Check the components that follow: • Registration idler roll, PL 80.15 Item 4. • Bias transfer roll, PL 80.15 Item 3. • Registration roll, PL 80.17 Item 6. • Registration drive pulley, PL 80.17 Item 3. • Registration drive belt, PL 80.17 Item 4. • Track (DTS), PL 90.10 Item 6, from the detack saw to the HVPS.

← Xem tất cả mã lỗi Xerox WorkCentre 5955

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie