Description: Toner Cartridge Empty RAP 393-390-00 Based on the toner concentration sensor reading, the toner cartridge is empty.
Remedy: NOTE: The front door and left door interlock switches must be cheated when checking +24V components. Cheat the front door interlock. Enter dC330 code 093-040, toner cartridge motor, MOT93-040. The toner cartridge rotates. Y↓N→Remove the toner cartridge, PL 90.17 Item 2. Enter dC330, code 093-040, toner cartridge motor, MOT93-040. The motor runs. Y↓N→Go to Flag 1. Check MOT93-040. Refer to: • GP 10 How to Check a Motor. • P/J767, IOT PWB. • 301G +24V Generation and Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new toner dispense module, PL 90.17 Item 1. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Check the toner dispense drive gears. If necessary, install a new toner dispense module, PL 90.17 Item 1. Remove the print cartridge, PL 90.17 Item 9, then place in a black bag. Remove the fuser, PL 10.8 Item 1. Put a sheet of paper beneath the toner dispense tube. Enter dC330, code 093-040, toner cartridge motor, MOT93-040. Manually open the shutter on the toner dispense tube. Toner is dispensed. Y↓N→Ensure the shutter on the toner dispense tube opens and closes correctly. If necessary, install a new toner dispense module, PL 90.17 Item 1. Ensure the shutter on the print cartridge, opens and closes correctly. If necessary, install a new print cartridge, PL 90.17 Item 9.