Description: Toner Cartridge Missing RAP 393-401-00 The toner cartridge PWB failed to detect the RF CRUM within 2 revolutions of the toner bottle. NOTE: The toner cartridge PWB is not present on W/TAG 013 machines.
Remedy: Remove the toner cartridge, PL 90.17 Item 2. The CRUM is attached to the toner cartridge. Y↓N→Install a new toner cartridge, PL 90.17 Item 2 that is compatible with the current machine configuration and the customer service plan. Enter dC330, code 093-045, print cartridge motor. Add the code 093-040, toner cartridge motor. NOTE: The routine 93-040 times out after 5 seconds. The toner cartridge rotates. Y↓N→Remove the toner cartridge, PL 90.17 Item 2. Enter dC330, code 093-040, toner cartridge motor, MOT93-040. The motor runs. Y↓N→Go to Flag 3. Check MOT93-040. Refer to: • GP 10 How to Check a Motor. • P/J766, IOT PWB. • 301G +24V Generation and Distribution RAP. • 301B 0V Distribution RAP. If necessary, install a new toner dispense module, PL 90.17 Item 1. If the fault persists, perform the OF7 IOT PWB Diagnostics RAP. Check the toner dispense drive gears. If necessary, install a new toner dispense module, PL 90.17 Item 1. Go to Flag 1. Check for +5V at P/J782 pins 1 and 6 on the IOT PWB. +5V is present. Y↓N→Go to: • 301E +5V and +5VSB Distribution RAP. • 301B 0V Distribution RAP. Remove the relevant component: • Horizontal transport assembly. • Centre output tray. Remove the toner cartridge PWB cover, PL 90.17 Item 11. Go to Flag 2. Check the wiring between the toner cartridge PWB and P/J782 on the IOT PWB. The wiring is good. Y↓N→Repair the wiring, GP 7 or install a new toner cartridge PWB, PL 90.17 Item 12. Install a new toner cartridge, PL 90.17 Item 2 that is compatible with the current machine configuration and the customer service plan. If the fault persists, perform the procedures that follow: • OF7 IOT PWB Diagnostics RAP. • 391A HVPS RAP.