Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 042-325 — Xerox WorkCentre 6025 MFP

Code: 042-325

Description: Motor Error MCU detects an error from the Main Drive Motor.
Causes: • Main Drive Assembly, PL6.1.2 • Main Motor Harness, PL6.1.7 • MCU Board, PL7.2.2
Remedy: 1. Check the Main Drive Motor in CE Diags. Does the Motor run? 1. SaveNVM to ESS. 2. Replace the MCU Board. 3. LoadNVM from ESS. Go to step 2. 2. Check the connections between the MCU Board P/J16 and the Main Drive Assembly P/J160. Are the connections secure? Go to step 3. Reconnect the connectors, then go to step 4. 3. Does the error persist? Go to step 4. Complete. 4. Is the Main Drive Assembly installed correctly? Go to step 5. Reseat the Main Drive Assembly, then go to step 6. 5. Does the error persist when the power is turned off and on? Go to step 6. Complete. 6. Check the Main Drive harness continuity. Disconnect P/J16 from the MCU Board and P/J160 from the Main Drive Assembly to check continuity. Is the harness damaged? Repair the harness. Go to step 7. 7. Check the power to the Main Drive Assembly. Disconnect connector P/J16 on the MCU Board. Are the voltages across ground at P/J16-2 and P/J16-4 approximately +24 VDC when the Interlock Switch is closed? Replace the Main Drive Assembly. 1. SaveNVM to ESS. 2. Replace the MCU Board. 3. LoadNVM from ESS.

← Xem tất cả mã lỗi Xerox WorkCentre 6025 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie