Remedy: 1. Test the Fan in CE Diag (see “Fan”). For the 6020: Test the Fan with the “Fan”. Does the Fan function normally? Go to step 2. Go to step 3. 2. Does the error persist? Replace the Fan. Complete. 3. Check the connections between the FAN and LVPS. Is P/J205 on the LVPS securely connected? Go to step 4. Complete. 4. Disconnect P/J205 on the LVPS. Is the voltage across ground at P/J205-1 approximately +24 VDC when the Interlock Switch is pushed? 1. SaveNVM to ESS. 2. Replace the MCU Board. 3. LoadNVM from ESS. Replace the LVPS.