Description: CRUM ID Error, Toner Cartridge (X) Detached An unsupported cartridge is detected or the indicated Toner Cartridge is not installed in the printer. If no toner cartridge has been installed in the printer, a warning is indicated in the following order: 1)Yellow 2)Magenta 3)Cyan 4)Black • 093-926: CRUM ID 093-926 Reseat K Cartridge
Remedy: 1. Are the Toner Cartridges installed in the printer Xerox Toner Cartridges? Go to step 2. Complete. 2. Disconnect P/J13 on the MCU Board and unlace the harness. Inspect the harness for damage. Is the harness damaged? Repair the harness, then go to step 3. Go to step 3. 3. Disconnect P/J13 on the PWBA MCU. Is the voltage across ground to P/J13-3 on the MCU Board approximately +3.3 VDC? Repair the Harness Assembly DCKR. Go to step 5. 4. Replace the Toner Cartridge (C, M, Y, or K). Does the error persist? 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Complete.