Description: Fuser Failure The operation error of Fuser (Temperature anomaly error etc.) is detected.
Causes: • Fuser, PL5.1.1 • MCU Board, PL7.2.2
Remedy: 1. Reseat the Fuser and cycle system power. Does the error persist? WARNING: Do not touch the fuser while it is hot. Go to step 2. Complete. 2. Check these connections 1. MCU Board P/J26 and P/J18. 2. LVPS P/J201. Are the connectors secure? Go to step 3. Secure the connectors. 3. Check the Fuser harness. 1. Remove the Fuser. 2. Disconnect P/J26 and P/J18 from the MCU Board and P/J201 from the LVPS. Is the harness damaged? Repair the harness. Go to step 4. 4. Replace the Fuser. Does the error persist? 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Complete.