Description: Exit Jams The paper passed through the Exit Sensor earlier than the specified time or the paper does not pass through the Exit Sensor within the specified time.• 077-108: Paper Jam 077-108 Printer Jam at Exit, <Exit Jam> Early pass • 077-109: Paper Jam 077-109 Printer Jam at Exit, <Exit Jam> No pa
Causes: Fuser, PL5.1.1 MCU Board, PL7.2.2
Remedy: 1. Remove the fuser exit guide see. Are any torn off pieces of paper present? Remove the paper. Go to step 2. 2. Check P/J18 on the MCU Board. Is P/J18 connected securely? Go to step 3. Reconnect P/J18, then go to step 3. 3. Does the error persist? Replace the Fuser. Go to step 4. Complete. 4. Does the error persist? Replace the MCU Board. Complete.