Remedy: 1 Is the Optional Feeder installed correctly? Go to step 3. Reseat the Optional Feeder, then go to step 2. 2 Does the error still occur when printing? Go to step 3. Complete. 3 Are the connections between the MCU Board and Option Feeder Board (P/ J27, P/J273, and P/J419) connected securely? Go to step 5. Reconnect the Plugs/Jacks securely, then go to step 4. 4 Does the error still occur when printing? Go to step 5. Complete. 5 Check the Optional Feeder Harness for continuity. Disconnect P/J419 from the Option Feeder Board and P/J273 from the Option Harness Assy. Is each cable of P/J419 <=> P/J273 continuous? Go to step 6. Replace the Optional Feeder Harness . 6 Check the Option Harness Assy for continuity. Disconnect P/J27 from the MCU Board. Disconnect P/J273 from the Optional Feeder Harness. Is each cable of P/J27 <=> P/J273 continuous? Go to step 7. Replace the Option Harness Assy. 7 Check after replacing the Optional Feeder. Replace the Optional Feeder. Does the error still occur when the power is turned On? Replace the MCU Board. Complete.