Code: 077-300
Description: IOT Cover Front Open
Causes: • Front Cover (SFP PL1.2.1; MFP PL1.2.1) • LVPS (SFP PL8.2.1; MFP PL8.2.12) • Harn Assy Interlock (SFP PL 8.2.5; MFP PL8.1.1) • MCU Board (SFP PL8.2.13; MFP PL8.3.6) • LVPS Main Harness Assy (PL9.1.3)
Remedy: 1 Check the Front Cover (Front Cover) for shape. Are there any damages on the Front Cover? Replace the Front Cover. Go to step 2. 2 Check the Front Cover for latching. Open and close the Front Cover. Is the Front Cover latched correctly? Go to step 3. Reseat or replace the Front Cover. 3 Perform the procedure “Cover Open Sensor (Interlock Switch)” on page 4-26 to check the Interlock Switch operation. Does the number on the screen increase by one, when the Front Cover is closed and opened? Replace the MCU Board. Go to step 4. 4 Check the connectors for connection. Check the connections between MCU Board and LVPS. Are P/J14 and P/J501 connected correctly? Go to step 6. Reconnect the connector(s) P/ J14 and/or P/ J501 correctly, then go to step 5. 5 Does the error still occur when the power is turned Off and On? Go to step 6. Complete. 6 Check the LVPS Main Harness Assy for continuity. Disconnect J14 from the MCU Board. Disconnect J501 from the LVPS. Is each cable of J14 <=> J501 continuous? Go to step 7. Replace the LVPS Main Harness Assy. 7 Check the power to the Interlock Switch Disconnect the connector of J44 on the LVPS. Is the voltage across P44-1 <=> ground on the LVPS, about +24 VDC? Go to step 8. Replace the LVPS 8 Check the Interlock Switch for operation Check the voltage across P44-3 <=> ground on the LVPS. Does the voltage change, when the Interlock Switch is turned On/Off? Replace the LVPS Replace the Interlock Harness Assy.