Remedy: 1 Check the Toner Door for shape. Are there any damages on the Toner Door? Replace the Toner Door. Go to step 2. 2 Check the Toner Door for latching. Open and close the Toner Door. Is the Toner Door latched correctly? Go to step 3. Replace the Toner Door. 3 Check the Toner Door Switch (PL5.1.9) for operation. In the Printer Diagnostic tests, use Engine Diag > Sensor Test > Side Switch. Does the number on the screen increase by one, when the Toner Door is closed and opened? Replace the MCU Board. Go to step 4. 4 Check the Toner Door Switch Harness for continuity. Disconnect J29 from the MCU Board. Disconnect J291 from the Toner Door Switch. Is each cable of J29 <=> J291 continuous? Go to step 5. Replace the Toner Dispenser Assembly. 5 Replace the Toner Door Switch. Does the error still occur when the power is turned Off and On? Replace the MCU Board. Complete.