Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-907 — Xerox WorkCentre 6505

Code: 077-907

Description: IOT Remain Duplex JAM
Causes: • Left Side Harness Assy (PL3.1.18) • Manual Feed No Paper Sensor (Sensor Photo) (PL3.2.13) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
Remedy: 1 Perform the procedure “Manual Feed Sensor” on page 4-20 to check operation of the Manual Feed No Paper Sensor. Does the number on the screen increase by one when you insert paper? Replace the MCU Board. Go to step 2. 2 Check the connections between the MCU Board and Manual Feed No Paper Sensor. Are P/J23 and P/J233 connected correctly? Go to step 3. Reconnect the connector(s) P/ J23 and/or P/ J233 correctly. 3 Check the Left Side Harness Assy for continuity. Disconnect J23 from the MCU Board. Disconnect J233 from the Manual Feed No Paper Sensor. Is each cable of J23 <=> J233 continuous? Go to step 4. Replace the Left Side Harness Assy. (PL 3.1.18) 4 Check the power to the Manual Feed No Paper Sensor. Disconnect J23 from the MCU Board. Is the voltage across P23-6 <=> ground on the MCU Board, about +3.3 VDC? Replace the Manual Feed No Paper Sensor. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox WorkCentre 6505

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie