Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 092-661 — Xerox WorkCentre 6505

Code: 092-661

Description: IOT Environment Sensor Error
Causes: • Humidity Sensor (SFP PL8.2.7; MFP PL8.1.10) • MCU Board (SFP PL8.2.13; MFP PL8.3.6) • SFP: Humidity Harness Assy (PL9.1.6) • MFP: Left Side Harness Assy (PL 3.1.18)
Remedy: 1 Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Check after resetting the Humidity Sensor. Reseat the Humidity Sensor. Does the error still occur when the power is turned Off and On? Go to step 3. Complete. 3 Check the Left Side Harness Assy for continuity. Disconnect J20 from the MCU Board. Disconnect J201 from the Humidity Sensor. Is each cable of J20 <=> J201 continuous? Go to step 4. SFP: Replace the Humidity Harness Assy. (PL 9.1.6) MFP: Replace the Left Side Harness Assy. (PL 3.1.18) 4 Check power to Humidity Sensor. Disconnect the connector of J20 from the MCU Board. Measure the voltage across P20-4 <=> ground on the MCU Board. Does the voltage measure about +5 VDC? Replace the Humidity Sensor. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox WorkCentre 6505

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie