Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 093-919, 093-920, 093-921, 093-922 — Xerox WorkCentre 6505

Code: 093-919, 093-920, 093-921, 093-922

Description: IOT YMCK Toner Low Density
Causes: • Imaging Unit (PL4.1.21) • Dispenser Assy (PL5.1.1) • Motor Frame Assy (PL5.1.2) • Dispenser Motor Assy (PL5.1.3) • Gear Idler (PL5.1.6) • Gear Idler Aug (PL5.1.7) • Gear Idler Agi (PL5.1.8) • Toner Cartridge (Y) (PL5.1.24) • Toner Cartridge (M) (PL5.1.23) • Toner Cartridge (C) (PL5.1.22) • Toner Cartridge (K) (PL5.1.21) • Toner Motor Harness Assy (PL5.1.25) • Transfer Belt (PL6.1.7) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
Remedy: 1 Check the Toner Type. Is XEROX Toner in use? Go to step 2. Go to step 5. 2 Are the sealing tapes still in the Imaging Unit? Pull the tape out. Go to step 3. 3 Using Printer Diagnostics, check the life count value of the Toner Cartridges (Y, M, C or K): Printer Diag > Parameter > Life (Y, M, C, K) Toner. Does the value returned indicate near end-of-life? (Refer to “Consumables” on page 1-16 for toner life specifications.) Replace the Toner Cartridge (Y, M, C or K), then go to step 4. Go to step 7. 4 Does the error still occur when the power is turned Off and On? Go to step 7. Complete. 5 Check the toner remaining in Non- XEROX Toner Cartridges (Y, M, C or K). Is there just a little toner remaining in the Non-XEROX Toner Cartridge? Replace the Non-XEROX Toner Cartridge, then go to step 6. Go to step 7 6 Does the error still occur when the power is turned Off and On? Go to step 7. Complete. 7 Check the sealing tapes for yellow toner of the Imaging Unit staying. Turn off the power, and open the Front Cover. Remove the Imaging Unit. Has the sealing tapes for yellow toner been pulled out? After Check, reseat the Imaging Unit. Go to step 9. Pull the sealing tapes out, then go to step 8. 8 Does the error still occur when the power is turned Off and On? Go to step 9. Complete. 9 Check after resetting the Toner Cartridge (Y, M, C or K). Remove the Toner Cartridge (Y, M, C or K), and shake it from side to side. Reseat the Toner Cartridge (Y, M, C or K), and check that the lock key is in the lock position. Does the error still occur when the power is turned Off and On? Go to step 10. Complete. 10 Perform the procedure gToner Motorsh on page 4-31to check the Toner Motors (Y, M, C and K) for rotation. Does each Toner Motor function normally? Go to step 11. Go to step 12. 11 Check the Dispenser Assy gears. Are the gears worn or damaged? Go to step 16. Replace the Dispenser Assy. 12 Check the connectors between the MCU Board and Toner Motors (Y, M, C and K). Are the following connected correctly? • P/J18 • P/J181(Y) • P/J182(M) • P/J19 • P/J191(C) • P/J192(K) Go to step 14. Reconnect all the connectors, then go to step 8. 13 Does the error still occur when the power is turned Off and On? Go to step 14. Complete. 14 Check the Toner Motor Harness Assy for continuity. Disconnect J18 from the MCU Board. Disconnect J181(Y)/J182(M)/J191(C)/ J192(K) from the DISPENSE MOTOR (YMCK) MOT. Is each cable of J18 <=> J181/182 continuous? or Is each cable of J19 <=> J191/192 continuous? Go to step 15. Replace the Toner Motor Harness Assy. 15 Check the power to TNR (Y) MOT (Dispenser Motor Assy). Disconnect J18/J19 from the MCU Board. Is the voltage across P18P/19-3 <= > ground on MCU Board, about +24 VDC when the interlock switch (Interlock Harness Assy) is pushed. Replace the Dispenser Motor Assy or Motor Frame Assy. Replace the MCU Board. 16 Check after replacing the Toner Cartridge (Y, M, C or K). Replace the Toner Cartridge (Y, M, C or K), and check that the handle is in the lock position. Does the error still occur when the power is turned Off and On? Go to step 17. Complete. 17 Check after replacing the Imaging Unit. Replace the Imaging Unit. Does the error still occur when the power is turned Off and On? Go to step 18. Complete. 18 Check after resetting the Transfer Belt. Reseat the Transfer Belt. Does the error still occur when the power is turned Off and On? Replace the Transfer Belt. Complete.

← Xem tất cả mã lỗi Xerox WorkCentre 6505

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie