Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 024-920 — Xerox WorkCentre 6605

Code: 024-920

Description: <IOT Standard Stacker Full> Center Tray Full is Detected.
Causes: • Full Stack Sensor (PL17.1.11) • Sensor Harness Assembly (PL17.1.23) • MCU Board (PL18.1.13)
Remedy: 1 Check the Full Stack Sensor operation Execute Digital Input diagnostic test 071-105, and check the Full Stack Sensor operation. Does it function normally? Replace the MCU Board. Go to step 2. 2 Check the Full Stack Sensor connection Check the connection between the Full Stack Sensor and the MCU Board. Are P/J154 and P/J15 connected securely? Go to step 3. Connect P/J154 and P/J15 securely. 3 Check the continuity between the Full Stack Sensor and the MCU Board Is each cable of P/J154<=>P/J15 continuous? Go to step 4. Replace the Sensor Harness Assembly. 4 Check the power to the Full Stack Sensor (+5 VDC) Check if the voltage between the MCU Board ground and the P/J15-4 pin is about +5 VDC. Replace the Full Stack Sensor. Refer to “+5 VDC Power FIP”.

← Xem tất cả mã lỗi Xerox WorkCentre 6605

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie