Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 075-910 — Xerox WorkCentre 6605

Code: 075-910

Description: MSI Detached MSI Detached
Causes: • Bypass Tray No Paper Sensor (PL13.2.4) • Bypass Tray Cover Assembly (PL13.3.2) • Bypass Tray Harness Assembly (PL13.2.5) • MCU Board (PL18.1.13)
Remedy: 1 Check the Bypass Tray installation Is the Bypass Tray installed properly? Go to step 2. Install the Bypass Tray properly. 2 Check the Bypass Tray Cover Assembly Is the Bypass Tray Cover Assembly broken? Replace the Bypass Tray Cover Assembly. Go to step 3. 3 Check the Bypass Tray No Paper Sensor operation Execute Digital Input diagnostic test 071-102, and check the Bypass Tray No Paper Sensor operation. Does the Bypass Tray No Paper Sensor function normally? Replace the MCU Board. Go to step 4. 4 Check the connections between Bypass Tray No Paper Sensor and the MCU Board Check the connection between the Bypass Tray No Paper Sensor and the MCU Board. Are P/J211 and P/J21 connected securely? Go to step 5. Connect P/J211 and P/J21 securely. 5 Check the Bypass Tray Harness Assembly continuity. Is each cable of P/J211<=>P/J21 continuous? Go to step 6. Replace the Bypass Tray Harness Assembly. 6 Check the power to the Bypass Tray No Paper Sensor (+5 VDC) Check if the voltage between the MCU Board ground and the P/J21- 1 pin is about +5 VDC. Replace the Bypass Tray No Paper Sensor.

← Xem tất cả mã lỗi Xerox WorkCentre 6605

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie