Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 2-4 — OKI B710

Code: 2-4

Description: ROS Motor Abnormality - Interval of /BD signal after ROS Motor starts is delayed than the specified value. - Interval of /BD signal became delayed than the specified value after it reached the specified value. - Laser beam output is not the specified level.
Remedy: FIP1.2 Possible causative parts: ROS ASSY HVPS/MCU EP CARTRIDGE HARNESS ASSY ROS LVPS 1 Checking NVRAM for data setup value Are the value of NV03 (resolution) and the value of NV04 (Laser Diode output) set at the initial setup value in the factory? Checks by Chapter 2 Diagnostic [ADJUSTMENT PARAMETER INITIALIZE MODE]. Go to FIP2.3 ROS ASSY. Set NV03 and NV04 to factory setup, and then check again. If Error still occurs, go to FIP2.3 ROS ASSY.

← Xem tất cả mã lỗi OKI B710

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie