Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 2-1 — OKI B730

Code: 2-1

Description: NVM Abnormality - Failure of the NVRAM occurred at powering on. - Write error to the NVRAM occurred.
Remedy: FIP1.1 Possible causative parts: HVPS/MCU 1 Does Error occur when the power is turned ON? Go to step 4. Go to step 2. 2 Does Error still occur when the power is turned OFF and ON again? Go to step 4. Go to step 3. 3 Does Error still occur after several ON/OFF procedures of the power? Go to step 4. End of work *1 4 Checking HVPS/MCU non-volatile memory setup mode Is non-volatile memory setup mode accessible? Checks by Chapter 2 Diagnostic [ADJUSTMENT PARAMETER INTIALIZE MODE]. Go to step 5. Replace HVPS/MCU. 5 Checking NVRAN for data setup Are all NVRAM data set appropriately? Checks by Chapter 2 Diagnostic [ADJUSTMENT PARAMETER INTIALIZE MODE]. Go to step 7. Go to step 6. 6 Checking Error after changing HVPS/MCU data setup Change NV RAM data to the correct setup value, and then turn the power ON again. Does Error still occur? Replace HVPS/MCU, then go to step 7. End of work 7 Checking after replacing HVPS/MCU Does Error occur? Go to FIP2.19 Electrical Noise. End of work

← Xem tất cả mã lỗi OKI B730

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie