Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E4 — Brother DCP377CW

Code: E4

Description: No recording paper fed. (No paper detected by the registration sensor.)
Causes:
Remedy: Paper tray not set in place Set the paper tray correctly. Recording paper not loaded correctly No paper loaded in the paper tray. Reload paper. Load the correct size of paper. Jam clear cover not closed correctly Close the jam clear cover correctly. Registration sensor harness connection failure Reconnect the harness. Registration sensor defective Replace the registration sensor PCB. Main PCB defective Replace the main PCB.

← Xem tất cả mã lỗi Brother DCP377CW

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie