Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C130, C140 — OKI CX1145

Code: C130, C140

Description: [C130] Upper drawer tray abnormality [C140] Lower drawer tray abnormality
Remedy: Does the tray go up? (Perform the output check: 03-242, 243) ↓→ NO → 1) Check if the connector of the tray-up motor is disconnected. 2) Check if the connector CN341 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the tray-up motor. 6) Replace the LGC board. YES Is the tray-up sensor working? (Perform the input check: 03-[FAX]OFF/[6]/[H], /[6]/[G]) ↓→ NO → 1) Check if the connector of the sensor is disconnected. 2) Check if the connector CN341 on the LGC board is disconnected. 3) Check if the slit reaches the sensor. 4) Check if the connector pins are disconnected or the harnesses are open circuited. 5) Check if the conductor pattern on the LGC board is short circuited or open circuited. 6) Replace the tray-up sensor. 7) Replace the LGC board. YES 1) Check if the conductor pattern on the LGC board is short circuited or open circuited. 2) Replace the LGC board.

← Xem tất cả mã lỗi OKI CX1145

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie