Code: C270
Description: Carriage home position sensor not going OFF within a specified time
Remedy: Remove the original glass and move the carriages to the paper feeding side. Turn ON the power and check the following items.
Are the carriages slightly moved to the feeding direction?/Are the carriages staying at a position other than home position? → YES → Check if the circuits of the SLG board are abnormal. NO 1) Check if the connector pin is disconnected or the harness is short circuited or open circuited. 2) Check if the conductor pattern on the SLG board is short circuited or open circuited. 3) Replace the SLG board.
Are the carriages slightly moved to the feeding direction?/Are the carriages staying at a position other than home position? → YES → Check if the circuits of the SLG board are abnormal. NO 1) Check if the connector pin is disconnected or the harness is short circuited or open circuited. 2) Check if the conductor pattern on the SLG board is short circuited or open circuited. 3) Replace the SLG board.