Code: CA20
Description: H-Sync detion error
Remedy: Is the cable (flexible flat type) between the connector (CN345) on the LGC board and connector (CN201) on the LDR board open circuited, broken or disconnected? ↓→ YES → 1) Reconnect the cable. 2) Check if the connector on the LGC board hold the cable securely. 3) Replace the laser optical unit. NO 1) Check if the units with high-voltage (developer unit, transfer belt unit and 2nd transfer roller unit) are securely grounded. 2) Check if the bias supply joints of the units with high-voltage are securely connected or they are not stained. 3) Check if the plate in paper transport system is securely grounded. 4) Check if the equipment is grounded. 5) Check if the conductor pattern is short circuited or open circuited. 6) Replace the LGC board. 7) Replace the laser optical unit.