Description: Punch motor (M3) home position detion error
Remedy: MJ-1101 (When MJ-6101 is installed) Is there any paper remaining on the transport path? → →YES Remove the paper. NO Rotate the punch motor (M3). Does it rotate smoothly? → →NO Fix the mechanism. YES Are the punch home position sensor (S4) and its wiring correct? → →NO Replace the sensor. Correct the wiring. YES Is the wiring between the hole punch control PC board (HP) and punch motor (M3) correct? → →NO Correct the wiring. YES 1) Replace the punch motor (M3). 2) Replace the hole punch control PC board (HP).