Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi CEA0 — OKI CX1145

Code: CEA0

Description: Revolver home position detion abnormality
Remedy: Is the revolver home position sensor working properly? (Perform the input check: 03-[FAX]ON/[2]/[C]) ↓→ NO → 1) Check if the connector or joint connector of the revolver home position sensor is disconnected. 2) Check if the connector CN331 on the LGC board is disconnected. 3) Check if the connector pins are disconnected or the wires of harnesses are open circuited. 4) Check if the conductor pattern on the LGC board is short circuited or open circuited. 5) Replace the revolver home position sensor. 6) Replace the LGC board. YES 1) Check if the conductor pattern on the LGC board is short circuited or open circuited. 2) Replace the LGC board.

← Xem tất cả mã lỗi OKI CX1145

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie