Code: CB60
Description: Stapler unit shift motor abnormality
Remedy: MJ-1023/1024 Is the stapler shift home position sensor (PI40) working normally? → NO → Replace the sensor. YES Is the wiring between the finisher controller PC board and the stapler shift motor (M35) correct? → NO → Correct the wiring. YES Is there any mechanical problem with the stapler stand motion path? → YES→ Fix the lift mechanism. NO 1) Replace the stapler shift motor. 2) Replace the finisher controller PC board.
MJ-1101 Is there any mechanical problem when the stapler is moved? → →YES Fix the mechanism. NO Is the harness between the stapler unit shift motor (M4) and the finisher control PC board (CN5) disconnected or open circuited? l → →YES • Reconnect the connector securely. • Replace the harness. NO 1) Replace the stapler unit shift motor (M4). 2) Replace the finisher control PC board.
MJ-1101 Is there any mechanical problem when the stapler is moved? → →YES Fix the mechanism. NO Is the harness between the stapler unit shift motor (M4) and the finisher control PC board (CN5) disconnected or open circuited? l → →YES • Reconnect the connector securely. • Replace the harness. NO 1) Replace the stapler unit shift motor (M4). 2) Replace the finisher control PC board.