Code: CC30
Description: Stack processing motor abnormality
Remedy: MJ-1022 [Procedure 1] Is the tension of the drive belt normal? → NO → Loosen the adjustment screw to adjust its tension. YES Does the bushing attached to the returning roller shaft smoothly move up and down? ↓→ NO → Apply grease on the cut-out part of the front side frame with where the bushing contacts. Is the spring of the returning roller detached? → YES→ Attach the spring. NO Is the wiring between the finisher controller PC board and stack processing motor (M2) correct? → NO → Correct the wiring. YES Is the stack delivery lever home position sensor (S8) working properly? → NO → Replace the sensor. YES 1) Replacing the stack processing motor. 2) Replace the finisher controller PC board. [Procedure 2] Does the bushing attached to the returning roller shaft smoothly move up and down? ↓→ NO → Apply grease on the cut-out part of the front side frame with where the bushing contacts. YES Is the spring of the returning roller detached? → YES→ Attach the spring. NO Is the tension of the stack processing motor drive belt normal? → NO → Loosen the adjustment screw to adjust its tension. YES Is the returning roller home position sensor (S3) working properly? → NO → Replace the sensor. YES 1) Replace the stack processing motor. 2) Replace the finisher controller PC board.