Code: CA10
Description: Polygonal motor abnormality
Causes: Laser optical unit LGC board
POL board Laser optical unit LGC board
POL board Laser optical unit LGC board
Remedy: ES9460 MFP / CX3535 MFP: 1 Is the polygonal motor rotating? Yes 3 No 2 2 Polygonal motor Connector check 3 LGC board • Connector check (CN343, J506) • Board check 4 Laser unit cooling fan • Check if the laser unit cooling fan is stopped. • Check if the suction area of the laser unit cooling fan is plugged up. 5 Units with high-voltage • Check if the units with high-voltage (developer unit, transfer belt unit, 2nd transfer roller unit) are securely grounded. • Check if the bias supply joints of the units with high-voltage are securely connected or they are not stained. 6 Plate in the paper transport system Check if the plate in the paper transport system is securely grounded. 7 Equipment Check if the equipment is grounded. 8 Laser unit cooling fan • Check if the laser unit cooling fan is stopped. • Check if the suction area of the laser unit cooling fan is plugged up.
ES9470 MFP / CX4545 MFP: 1 Is the polygonal motor rotating? Yes 2 No 3 2 Is the printed image distorted? Yes 3 No 6 3 POL board • Connector check (connectors on the both edges of the HRNS-POLDRV- 382) • Board check 4 LGC board • Connector check (CN343, J506) • Board check 5 5 Laser unit cooling fan • Check if the laser unit cooling fan is stopped. • Check if the suction area of the laser unit cooling fan is plugged up. 6 LGC board Board check 7 Units with high-voltage • Check if the units with high-voltage (developer unit, transfer belt unit, 2nd transfer roller unit) are securely grounded. • Check if the bias supply joints of the units with high-voltage are securely connected or they are not stained. 8 Plate in the paper transport system Check if the plate in the paper transport system is securely grounded. 9 Equipment Check if the equipment is grounded. 10 Laser unit cooling fan • Check if the laser unit cooling fan is stopped. • Check if the suction area of the laser unit cooling fan is plugged up.
ES9470 MFP / CX4545 MFP: 1 Is the polygonal motor rotating? Yes 2 No 3 2 Is the printed image distorted? Yes 3 No 6 3 POL board • Connector check (connectors on the both edges of the HRNS-POLDRV- 382) • Board check 4 LGC board • Connector check (CN343, J506) • Board check 5 5 Laser unit cooling fan • Check if the laser unit cooling fan is stopped. • Check if the suction area of the laser unit cooling fan is plugged up. 6 LGC board Board check 7 Units with high-voltage • Check if the units with high-voltage (developer unit, transfer belt unit, 2nd transfer roller unit) are securely grounded. • Check if the bias supply joints of the units with high-voltage are securely connected or they are not stained. 8 Plate in the paper transport system Check if the plate in the paper transport system is securely grounded. 9 Equipment Check if the equipment is grounded. 10 Laser unit cooling fan • Check if the laser unit cooling fan is stopped. • Check if the suction area of the laser unit cooling fan is plugged up.