Code: 122, 128
Description: Motor fan error (error code 122, 128)
Remedy: The rear fan and front fan does not rotate immediately after the power is turned on.
(12-1-1) Cable connection condition and wiring condition Cable connection condition and wiring condition of the rear fan and front fan Check if the connectors are connected normally or not. Check if extra length of the cables does not touch the fan blade or not. Correct the connection condition of the connectors. Correct the cable wiring route. Replace the fan.
All fans of the printer do not rotate.
12-2-1) 24V power supply CU/PU board fuses, F1, F5 and F6 Check if the fuses F1, F5 and F6 are not open-circuit or not. Replace the CU/PU board 24V power supplied to the CU/PU board Check the power supply voltages at the POWER connector of the CU/PU board. Pins 12, 13 and 14: 24V Pins 9, 10 and 11: 0VP Replace the low voltage power supply.
(12-1-1) Cable connection condition and wiring condition Cable connection condition and wiring condition of the rear fan and front fan Check if the connectors are connected normally or not. Check if extra length of the cables does not touch the fan blade or not. Correct the connection condition of the connectors. Correct the cable wiring route. Replace the fan.
All fans of the printer do not rotate.
12-2-1) 24V power supply CU/PU board fuses, F1, F5 and F6 Check if the fuses F1, F5 and F6 are not open-circuit or not. Replace the CU/PU board 24V power supplied to the CU/PU board Check the power supply voltages at the POWER connector of the CU/PU board. Pins 12, 13 and 14: 24V Pins 9, 10 and 11: 0VP Replace the low voltage power supply.